|
The RGP2 is a pole strap/ work-positioning device, designed to be clipped to
the side dees of a harness or work-positioning belt. The adjuster is easy to
use “one handed” either under tension or not. The 45mm webbing,
is protected by a wide pad in the work area, to offer some protection against
abrasion and extend the life of the product. The 1.4mtr length of the RGP2 allows
the user enough freedom of movement, without being exposed to a fall.
The RGP2 is primarily used for pole climbing, but can also be pressed into service
for mast climbing, maintenance and general work on open steel structures. When
pole climbing, additional equipment should be used to prevent falls whilst moving.
When the RGP2 is attached, the operative can then use both hands to perform
tasks whilst in a safe and comfortable position. This device is normally used
in conjunction with an RGH3 or RGH4, which also allows for the attachment of
additional fall arrest equipment.
| DATA |
| Accredited To |
EN 358 |
| Material |
45mm Polyester webbing |
| Fittings |
High tensile alloy steel |
| Weight |
0.6 kgs |
| Features |
Wide protector pad. |
| Max
Arrest Force |
RESTRAINT ONLY |
* Prices are subject to availabilty and price fluctuations.
|